Industrial

Compressed air is an essential service for any sort of industrial or production facility. That’s why it is often described as the fourth utility, behind electricity, gas and water.

In industrial and production environments, an air compressor will work much harder than when it is being used by a hobbyist or professional user. You need an industrial air compressor to cope with the air demand on site, avoiding delays in manufacturing or high repair and servicing costs.

Industrial piston air compressors are designed for more demanding intermittent applications or heavily contaminated environments.

ABAC PRO A39B 270 FM3 TANDEM

ABAC PRO A39B 270 FM3 TANDEM

This is the largest output available in the ABAC piston range that will run on single phase electrics and capable of running standard spray guns, tyre inflators.

CFM

27.6

Engine

230/50/1

Horsepower

3 + 3

ABAC PRO B5900B 200 FT5.5

ABAC PRO B5900B 200 FT5.5

This two stage belt drive compressor is a 5.5 HP static compressor mounted on a 200 litre receiver, suitable for a workshop were three phase is available. It is capable of running standard spray gun, tyre inflator, impact/ratchet wrenches or a low consumption shot blast cabinet.

CFM

22.9

Engine

400/50/3

Horsepower

5.5

ABAC PRO B7000 270 FT10 YD

ABAC PRO B7000 270 FT10 YD

If you need an air compressor for an industrial environment or large workshop, the ABAC PRO B7000 range is an excellent starting point. When you choose a two stage belt drive compressor, you get a tough piece of equipment with a high duty cycle. This will give you a high enough capacity of compressed air for most large workshops and many industrial settings.

CFM

42.4

Engine

400/50/3 YD

Horsepower

10

PRO CA2 500 FT10 YD

PRO CA2 500 FT10 YD

Piston compressors with fully cast iron blocks: a reliable and robust range, built with top quality components. The pumps are running at a low speed, to guarantee lower noise levels, lower operating temperatures and extended lifetimes, but they still guarantee a great performance, and they are perfectly suitable for the more demanding and intensive applications.

CFM

37.3

Engine

400/50/3 YD

Horsepower

10

PRO B6000 500 T7.5

PRO B6000 500 T7.5

Our PRO high flow tandem units are ideal for those users who are looking for high volume output from a compact footprint. Two identical compressor / motor units mounted on a single air receiver they can operate together using the same pressure switch or with the addition of a second pressure switch they can be configured as duty / standby units.

CFM

57.9

Engine

400/50/3 YD

Horsepower

7.5 + 7.5