Large Workshops

If you’re running a larger workshop, you need more compressed air so a 2-stage belt driven compressor with greater flow is likely to fit the bill. We’ve got several options for garages with 3-4 users (or 1-2 people running air tools or spray painting almost continuously). These are all mostly powered by 3-phase electricity and you’ll find them in our PRO Line Compressor range. We recommend a piston compressor from the B4900 and B5900 pump ranges for automotive workshops with 3-4 users. These include tandem compressors. There are also “LN” or Low Noise Compressors and you can select one with a tank mounted refrigerant dryer configuration from the “FFO” range. The FFO range of compressors produce cleaner, dryer air which helps to extend the life of your tools.

If you aren’t sure which model is best for you, just ask our experts on 01869 326 226.

If your workshop has 6-8 people (or 3-4 who use a lot of compressed air), we suggest you look at something bigger. Most of our customers with big garages pick compressors from the B6000 and B7000 ranges. Again, you can pick tandem, “LN” and “FFO” models if you’d like to cut down on noise or want to protect your equipment by using a refrigerant dryer with your compressor. These are also in the Frequent Use Pro Compressor range. As always, our friendly team is here to help if you aren’t sure exactly which model is best for you. Just call them on 01869 326 226.

ABAC PRO A39B 270 FM3 TANDEM

ABAC PRO A39B 270 FM3 TANDEM

This is the largest output available in the ABAC piston range that will run on single phase electrics and capable of running standard spray guns, tyre inflators.

CFM

27.6

Electrical Supply

230/50/1

Horsepower

3 + 3

ABAC PRO B5900B 200 FT5.5

ABAC PRO B5900B 200 FT5.5

This two stage belt drive compressor is a 5.5 HP static compressor mounted on a 200 litre receiver, suitable for a workshop were three phase is available. It is capable of running standard spray gun, tyre inflator, impact/ratchet wrenches or a low consumption shot blast cabinet.

CFM

22.9

Electrical Supply

400/50/3

Horsepower

5.5

ABAC PRO B7000 270 FT10 YD

ABAC PRO B7000 270 FT10 YD

If you need an air compressor for an industrial environment or large workshop, the ABAC PRO B7000 range is an excellent starting point. When you choose a two stage belt drive compressor, you get a tough piece of equipment with a high duty cycle. This will give you a high enough capacity of compressed air for most large workshops and many industrial settings.

CFM

42.4

Electrical Supply

400/50/3 YD

Horsepower

10

PRO CA2 500 FT10 YD

PRO CA2 500 FT10 YD

Piston compressors with fully cast iron blocks: a reliable and robust range, built with top quality components. The pumps are running at a low speed, to guarantee lower noise levels, lower operating temperatures and extended lifetimes, but they still guarantee a great performance, and they are perfectly suitable for the more demanding and intensive applications.

CFM

37.3

Electrical Supply

400/50/3 YD

Horsepower

10

PRO B6000 500 T7.5

PRO B6000 500 T7.5

Our PRO high flow tandem units are ideal for those users who are looking for high volume output from a compact footprint. Two identical compressor / motor units mounted on a single air receiver they can operate together using the same pressure switch or with the addition of a second pressure switch they can be configured as duty / standby units.

CFM

57.9

Electrical Supply

400/50/3 YD

Horsepower

5.5 + 5.5