Bodyshops & Spray Painting

We always recommend you use a refrigerant dryer with your air compressor when you are painting. You’ll also need to choose an air compressor with a generous sized receiver, to make sure you don’t run out of air halfway through a job! Popular systems in this range include B6000 LN 500 T 7.5 DRY and B7000 LN 500 T 10 DRY YD.

B4900 270 FT4 FFO

B4900 270 FT4 FFO

This two stage belt drive compressor is a 4 HP static compressor mounted on a 270 litre receiver, suitable for a workshop where three phase is available. It is capable of running standard spray gun, tyre inflator, impact/ratchet wrenches or a low consumption shot blast cabinet. This compressor is the perfect choice for small workshops. With the addition of a refrigerant air dryer it becomes a complete air station producing dry compressed air providing better quality air for air tools and paint spraying.

CFM

18.1

Electrical Supply

400/50/3

Horsepower

4

B 7000 500 FT10 FFO YD

This two stage belt drive compressor is a 10 HP static compressor mounted on a 500 litre receiver, suitable for a workshop were three phase is available. It is capable of running standard spray gun, tyre inflator, impact/ratchet wrenches or a shot blast cabinet. This compressor is the perfect choice for large workshops. With the addition of a refrigerant air dryer it becomes a complete air station producing dry compressed air providing better quality air for air tools and paint spraying.

CFM

42.7

Electrical Supply

400/50/3 YD

Horsepower

10

B6000 LN 500 T 7.5 DRY

B6000 LN 500 T 7.5 DRY

For those users who demand low noise and improved air quality our tank mounted full silent two stage units with refrigerant air dryer fit the bill. A full feature unit achieving maximum noise reduction using a full metal cabinet with acoustic foam lining and water removal using a refrigerant air dryer makes this a user friendly unit which can be located close to the point of use

CFM

23.3

Electrical Supply

400/50/3

Horsepower

7.5